questions...
1. What did you mean by "Production setting"?
access to the GPU. That command weakens/compromises x11 security by
allowing *anyone* to use the local x server. It's the easiest way to get
PV to use GPU on a system that already has x11 running. I just want to
make it easy for you to get something going. Once you have it working
you can refine the x11 options so that security is not compromised.
1. I am right now testing PV on small test cases over machines (my
Mac and the remote Linux) which have both graphics hardware. For
such a case why do I need "reverse connection"? Should I always
use "reverse connection"?
graphics hardware or not, it simply describes who connects to who when.
ParaView's reverse connection is its most versatile connection option.
It can handle every use case I've ever come across. Here's the
for it. however with the reverse connection the client waits for the
server to start and connect back. The case where you really need the
doesn't start up immediately.
Using graphics hardware correctly on the server is another issue. For a
it's ok to let pv to use the graphics cards. for a cluster you may have
to start the xserver yourself. and remember don't use ssh x forwarding
1. When I am at lab, I have a static IP for my Mac and I can log into
it from other computers. But I cannot access my Mac from outside
when I am not in the lab. Does this mean I cannot use pvserver
outside the lab? Or is this link
<https://hpcforge.org/plugins/mediawiki/wiki/pv-meshless/index.php/Launching_ParaView_on_HPC_Machines#Step_2>
is talking about this problem?
pvserver will run. As long as you can ssh to a machine that can see the
and/or port forwarding. ssh is extremely versatile. I don't have enough
info about your network to give you a more specific answer.
1.
Once I manage to understand and get it working, I want to use PV
using a supercomputing facility. On the supercomputing facility I
can install PV on my login node (which has 64 processors) but not
on the supercomputing cluster. If I want to use the cluster (which
has around 50,000 processors) to visualize a big
data (around 800GB if possible), will installing Paraview with MPI
support on the login node, which is accesible by the cluster, be
sufficient?
the compute nodes. Often your home folder is mounted on compute nodes.
If not, there's usually a scratch file system for parallel I/O mounted.
You'll need to launch the server through a batch script. For debugging
purposes you could use an interactive batch job to get the hang of it.
Hello Burlen,
I managed to get Paraview talk to the server using the instructions on
this website
<https://hpcforge.org/plugins/mediawiki/wiki/pv-meshless/index.php/Launching_ParaView_on_HPC_Machines#Step_2>.
That itself clarified Question number 1, 4 and 5 for me. I would
really appreciate if you can still answer my other queries.
Thanks again,
Pradeep
2013/1/30 Pradeep Jha <pradeep at ccs.engg.nagoya-u.ac.jp
<mailto:pradeep at ccs.engg.nagoya-u.ac.jp>>
Hello Burlen,
thanks for the detailed response. I am still not able to get it
work and somethings are still not clear to me. I want to ask some
very fundamental questions as this is my first time trying to set
up a something over the networks myself and the online
instructions are a bit too technical for me.
Presently, I have PV 3.98 installed from source with MPI support
on my local Mac and a remote Linux machine. I ran the pvsc file
that you sent from my local Mac but I was not sure what goes in
the input for "MPI Root" and "ParaView Root". I left those two
------------------------------------------------------------------------
pradeep at laptop subset]$MPI_NP=4
MPI_ROOT=
PV_ROOT=
PV_SERVER_PORT=11111
REMOTE_USER=pradeep
SERVER_HOST=83.shin.fluid.cse.nagoya-u.ac.jp
<http://83.shin.fluid.cse.nagoya-u.ac.jp>
SSH_PATH=/usr/bin/ssh
XTERM_PATH=/usr/bin/xterm
Accepting connection(s): laptop.local:11111
Server launch command is : /usr/bin/xterm -T "ParaView Server
pradeep at 83.shin.fluid.cse.nagoya-u.ac.jp:11111
<http://pradeep at 83.shin.fluid.cse.nagoya-u.ac.jp:11111>" -e
/usr/bin/ssh -t -R 11111:localhost:11111
pradeep at 83.shin.fluid.cse.nagoya-u.ac.jp
<mailto:pradeep at 83.shin.fluid.cse.nagoya-u.ac.jp> DISPLAY=:0 xhost
+ ; LD_LIBRARY_PATH=/lib:/lib/paraview-3.98/:LD_LIBRARY_PATH
DISPLAY=:0 /bin/mpirun -np 4 /bin/pvserver --reverse-connection
--server-port=11111 --client-host=localhost
The process failed to start. Either the invoked program is
missing, or you may have insufficient permissions to invoke the
program.
Server launch timed out.
---------------------------------------------------------------------------
1. How do I get the above thing working?
2. What did you mean by "Production setting"?
3. I am right now testing PV on small test cases over machines
(my Mac and the remote Linux) which have both graphics
hardware. For such a case why do I need "reverse connection"?
Should I always use "reverse connection"?
4. I don't understand when I initiate a pvserver on the remote
Linux machine and try to connect it from local Mac, why
doesn't it ask for a password?
5. My understanding is that when I get this connection going, all
my data should be on the server. I simply use the local Mac
GUI and I should be able to visualize and browse through data
at the remote end. Is that correct?
6. When I am at lab, I have a static IP for my Mac and I can log
into it from other computers. But I cannot access my Mac from
outside when I am not in the lab. Does this mean I cannot use
pvserver outside the lab? Or is this link
<https://hpcforge.org/plugins/mediawiki/wiki/pv-meshless/index.php/Launching_ParaView_on_HPC_Machines#Step_2>
is talking about this problem?
7.
Once I manage to understand and get it working, I want to use
PV using a supercomputing facility. On the supercomputing
facility I can install PV on my login node (which has 64
processors) but not on the supercomputing cluster. If I want
to use the cluster (which has around 50,000 processors) to
visualize a big
data (around 800GB if possible), will installing Paraview with
MPI support on the login node, which is accesible by the
cluster, be sufficient?
I guess these questions are extremely basic but I am responsible
for figuring this whole thing out myself and with not much direct
experience in networking. So it is troubling me a bit.
Hoping to hear from you,
Pradeep
2013/1/30 Burlen Loring <bloring at lbl.gov <mailto:bloring at lbl.gov>>
Hi Pradeep,
vtkClientSocket (0x7fc9ae108cb0): Socket error in call to
connect. Permission denied.
Your connection is being blocked somewhere in between your
compute node and workstation. there are various configuration
setting on either/both client and server that could cause it.
Fortunately we do not need to change any of these settings ,
many of which require root access and potentially open
security vulnerabilities. Instead, you will use an ssh tunnel
and a server config (pvsc) tailored to your situation to
automate the process.
I'm attaching a minimal pvsc that illustrates how one might
configure a reverse connection to a server with graphics
hardware. This pvsc is for illustration only, don't use in a
production setting! There are number of liberties I've taken,
for example I assume that X11 is already running, and I use
"xhost +"(very very bad) to enable pvserver to access gpu's.
Normally I would put all of the server side stuff in a shell
script. I didn't do that here to keep things simple for you. I
hope you can use this to understand how PV works.
1) I connect to the CentOS machine using "ssh -X machinename".
Don't do that. With -X forwarding you won't be taking
advantage of your cluster's graphics hardware.
Hope this helps
Burlen
Doesn't look like your client machine can connect to the server
ping 83.shin.fluid.cse.nagoya-u.ac.jp
<http://83.shin.fluid.cse.nagoya-u.ac.jp>
telnet 83.shin.fluid.cse.nagoya-u.ac.jp
<http://83.shin.fluid.cse.nagoya-u.ac.jp> 11111
On Tue, Jan 29, 2013 at 4:58 AM, Pradeep Jha
<pradeep at ccs.engg.nagoya-u.ac.jp
Hello,
I have installed Paraview 3.98 on my Desktop (Mac OSX
10.8) and a remote
machine running CentOS 5.4. The CentOS machine has
rendering hardware so I
havent installed PV with OSMesa support.
I can login to the CentOS from my Mac using SSH and
vice versa.
1) I connect to the CentOS machine using "ssh -X
machinename". When I start
-------------------------------------------------------------------
[pradeep at 83 ~]$pvserver
Waiting for client...
cs://83.shin.fluid.cse.nagoya-u.ac.jp:11111
<http://83.shin.fluid.cse.nagoya-u.ac.jp:11111>
83.shin.fluid.cse.nagoya-u.ac.jp:11111
<http://83.shin.fluid.cse.nagoya-u.ac.jp:11111>
-------------------------------------------------------------------
2) Then I add this information in the paraview I am
running on my Mac as
shown in the attached image file.
3) I click on connect.
------------------------------------------------------------------------
ERROR: In
/Users/pradeep/softwares/ParaView/VTK/Common/System/vtkSocket.cxx,
line 481
vtkClientSocket (0x7fc9ae108cb0): Socket error in call
to connect.
Permission denied.
-----------------------------------------------------------------------
I dont have any expertise in networking and so I dont
know much about
firewalls of my systems here nor do any my colleagues do.
Thanks in advance,
Pradeep
_______________________________________________
Powered by www.kitware.com <http://www.kitware.com>
Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
Please keep messages on-topic and check the ParaView
http://paraview.org/Wiki/ParaView
http://www.paraview.org/mailman/listinfo/paraview
_______________________________________________
Powered by www.kitware.com <http://www.kitware.com>
Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
Please keep messages on-topic and check the ParaView Wiki
at: http://paraview.org/Wiki/ParaView
http://www.paraview.org/mailman/listinfo/paraview
An HTML attachment was scrubbed...
URL: <http://www.paraview.org/pipermail/paraview/attachments/20130130/80d5ae97/attachment-0001.htm>
>
>