Discussion:
[Paraview] How to plot data from a specific point over time?
Pedro Ceccon Thurler
2015-01-21 16:35:41 UTC
Permalink
Hey guys!
I'm in trouble trying to make some plots in paraview.
For my analysis, it's important to plot data from a specific point over
time.
I'm trying some filters, but I'm not succeeding. Do you have some tips or
advices? Thank you for your attention.

Pedro Ceccon Thurler

Bolsista CNPq - Laboratório de Simulação de Sistemas de Construção Naval
Departamento de Engenharia Naval e Oceânica - UFRJ
Cel: (21) 9 8234-9794
Daniel Bruno
2015-01-21 16:50:31 UTC
Permalink
Hi Pedro.

What's the problem you are facing to plot data over time for a certain
point more specifically?




Daniel.
Post by Pedro Ceccon Thurler
Hey guys!
I'm in trouble trying to make some plots in paraview.
For my analysis, it's important to plot data from a specific point over
time.
I'm trying some filters, but I'm not succeeding. Do you have some tips or
advices? Thank you for your attention.
Pedro Ceccon Thurler
Bolsista CNPq - Laboratório de Simulação de Sistemas de Construção Naval
Departamento de Engenharia Naval e Oceânica - UFRJ
Cel: (21) 9 8234-9794
_______________________________________________
Powered by www.kitware.com
Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
http://paraview.org/Wiki/ParaView
Search the list archives at: http://markmail.org/search/?q=ParaView
http://public.kitware.com/mailman/listinfo/paraview
Armin Wehrfritz
2015-01-21 16:44:31 UTC
Permalink
Have you tried the "Plot Selection Over Time" filter?
It's in "Filter->Data Analysis". You can select cell or point data.

-Armin
Post by Pedro Ceccon Thurler
Hey guys!
I'm in trouble trying to make some plots in paraview.
For my analysis, it's important to plot data from a specific point over
time.
I'm trying some filters, but I'm not succeeding. Do you have some tips
or advices? Thank you for your attention.
Pedro Ceccon Thurler
Bolsista CNPq - Laboratório de Simulação de Sistemas de Construção Naval
Departamento de Engenharia Naval e Oceânica - UFRJ
Cel: (21) 9 8234-9794
_______________________________________________
Powered by www.kitware.com
Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html
Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView
Search the list archives at: http://markmail.org/search/?q=ParaView
http://public.kitware.com/mailman/listinfo/paraview
_______________________________________________
Powered by www.kitware.com

Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html

Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView

Search the list archives at: http://markmail.org/search/?q=ParaView

Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview
Pedro Ceccon Thurler
2015-01-21 16:57:45 UTC
Permalink
The guys from the lab did an experiment and measured the residual stress on
some points with specific coordinates.
I have to measure the stress on the same points along time in my simulation
so i can compare the results with the real values and validate my model.
But I don't know how to do that.

Pedro Ceccon Thurler

Bolsista CNPq - Laboratório de Simulação de Sistemas de Construção Naval
Departamento de Engenharia Naval e Oceânica - UFRJ
Cel: (21) 9 8234-9794
Post by Armin Wehrfritz
Have you tried the "Plot Selection Over Time" filter?
It's in "Filter->Data Analysis". You can select cell or point data.
-Armin
Post by Pedro Ceccon Thurler
Hey guys!
I'm in trouble trying to make some plots in paraview.
For my analysis, it's important to plot data from a specific point over
time.
I'm trying some filters, but I'm not succeeding. Do you have some tips
or advices? Thank you for your attention.
Pedro Ceccon Thurler
Bolsista CNPq - Laboratório de Simulação de Sistemas de Construção Naval
Departamento de Engenharia Naval e Oceânica - UFRJ
Cel: (21) 9 8234-9794
_______________________________________________
Powered by www.kitware.com
Visit other Kitware open-source projects at http://www.kitware.com/
opensource/opensource.html
http://paraview.org/Wiki/ParaView
Search the list archives at: http://markmail.org/search/?q=ParaView
http://public.kitware.com/mailman/listinfo/paraview
_______________________________________________
Powered by www.kitware.com
Visit other Kitware open-source projects at http://www.kitware.com/
opensource/opensource.html
http://paraview.org/Wiki/ParaView
Search the list archives at: http://markmail.org/search/?q=ParaView
http://public.kitware.com/mailman/listinfo/paraview
Andy Bauer
2015-01-21 16:58:46 UTC
Permalink
For moving grids or grids that don't have a grid point exactly at the
coordinate you want to plot over time, you can use the probe filter to get
the desired location and then use the plot selection over time for that.
Post by Pedro Ceccon Thurler
The guys from the lab did an experiment and measured the residual stress
on some points with specific coordinates.
I have to measure the stress on the same points along time in my
simulation so i can compare the results with the real values and validate
my model.
But I don't know how to do that.
Pedro Ceccon Thurler
Bolsista CNPq - Laboratório de Simulação de Sistemas de Construção Naval
Departamento de Engenharia Naval e Oceânica - UFRJ
Cel: (21) 9 8234-9794
Have you tried the "Plot Selection Over Time" filter?
Post by Armin Wehrfritz
It's in "Filter->Data Analysis". You can select cell or point data.
-Armin
Post by Pedro Ceccon Thurler
Hey guys!
I'm in trouble trying to make some plots in paraview.
For my analysis, it's important to plot data from a specific point over
time.
I'm trying some filters, but I'm not succeeding. Do you have some tips
or advices? Thank you for your attention.
Pedro Ceccon Thurler
Bolsista CNPq - Laboratório de Simulação de Sistemas de Construção Naval
Departamento de Engenharia Naval e Oceânica - UFRJ
Cel: (21) 9 8234-9794
_______________________________________________
Powered by www.kitware.com
Visit other Kitware open-source projects at http://www.kitware.com/
opensource/opensource.html
http://paraview.org/Wiki/ParaView
Search the list archives at: http://markmail.org/search/?q=ParaView
http://public.kitware.com/mailman/listinfo/paraview
_______________________________________________
Powered by www.kitware.com
Visit other Kitware open-source projects at http://www.kitware.com/
opensource/opensource.html
http://paraview.org/Wiki/ParaView
Search the list archives at: http://markmail.org/search/?q=ParaView
http://public.kitware.com/mailman/listinfo/paraview
_______________________________________________
Powered by www.kitware.com
Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
http://paraview.org/Wiki/ParaView
Search the list archives at: http://markmail.org/search/?q=ParaView
http://public.kitware.com/mailman/listinfo/paraview
Pedro Ceccon Thurler
2015-01-23 16:03:47 UTC
Permalink
Thank you all, guys!
I solved my problem. I'm able to plot the data now.
But, only one more question: is it possible to export this plot data to a
Excel file?
If it's possible, how do I do that?



Pedro Ceccon Thurler

Bolsista CNPq - Laboratório de Simulação de Sistemas de Construção Naval
Departamento de Engenharia Naval e Oceânica - UFRJ
Cel: (21) 9 8234-9794
Post by Andy Bauer
For moving grids or grids that don't have a grid point exactly at the
coordinate you want to plot over time, you can use the probe filter to get
the desired location and then use the plot selection over time for that.
On Wed, Jan 21, 2015 at 11:57 AM, Pedro Ceccon Thurler <
Post by Pedro Ceccon Thurler
The guys from the lab did an experiment and measured the residual stress
on some points with specific coordinates.
I have to measure the stress on the same points along time in my
simulation so i can compare the results with the real values and validate
my model.
But I don't know how to do that.
Pedro Ceccon Thurler
Bolsista CNPq - Laboratório de Simulação de Sistemas de Construção Naval
Departamento de Engenharia Naval e Oceânica - UFRJ
Cel: (21) 9 8234-9794
Have you tried the "Plot Selection Over Time" filter?
Post by Armin Wehrfritz
It's in "Filter->Data Analysis". You can select cell or point data.
-Armin
Post by Pedro Ceccon Thurler
Hey guys!
I'm in trouble trying to make some plots in paraview.
For my analysis, it's important to plot data from a specific point over
time.
I'm trying some filters, but I'm not succeeding. Do you have some tips
or advices? Thank you for your attention.
Pedro Ceccon Thurler
Bolsista CNPq - Laboratório de Simulação de Sistemas de Construção Naval
Departamento de Engenharia Naval e Oceânica - UFRJ
Cel: (21) 9 8234-9794
_______________________________________________
Powered by www.kitware.com
Visit other Kitware open-source projects at http://www.kitware.com/
opensource/opensource.html
http://paraview.org/Wiki/ParaView
Search the list archives at: http://markmail.org/search/?q=ParaView
http://public.kitware.com/mailman/listinfo/paraview
_______________________________________________
Powered by www.kitware.com
Visit other Kitware open-source projects at http://www.kitware.com/
opensource/opensource.html
http://paraview.org/Wiki/ParaView
Search the list archives at: http://markmail.org/search/?q=ParaView
http://public.kitware.com/mailman/listinfo/paraview
_______________________________________________
Powered by www.kitware.com
Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
http://paraview.org/Wiki/ParaView
Search the list archives at: http://markmail.org/search/?q=ParaView
http://public.kitware.com/mailman/listinfo/paraview
David E DeMarle
2015-01-23 16:12:06 UTC
Permalink
Click on the filter in the pipeline and then go to save data.
Choose csv format, which excel will readily read.


David E DeMarle
Kitware, Inc.
R&D Engineer
21 Corporate Drive
Clifton Park, NY 12065-8662
Phone: 518-881-4909
Post by Pedro Ceccon Thurler
Thank you all, guys!
I solved my problem. I'm able to plot the data now.
But, only one more question: is it possible to export this plot data to a
Excel file?
If it's possible, how do I do that?
Pedro Ceccon Thurler
Bolsista CNPq - Laboratório de Simulação de Sistemas de Construção Naval
Departamento de Engenharia Naval e Oceânica - UFRJ
Cel: (21) 9 8234-9794
Post by Andy Bauer
For moving grids or grids that don't have a grid point exactly at the
coordinate you want to plot over time, you can use the probe filter to get
the desired location and then use the plot selection over time for that.
On Wed, Jan 21, 2015 at 11:57 AM, Pedro Ceccon Thurler <
Post by Pedro Ceccon Thurler
The guys from the lab did an experiment and measured the residual stress
on some points with specific coordinates.
I have to measure the stress on the same points along time in my
simulation so i can compare the results with the real values and validate
my model.
But I don't know how to do that.
Pedro Ceccon Thurler
Bolsista CNPq - Laboratório de Simulação de Sistemas de Construção Naval
Departamento de Engenharia Naval e Oceânica - UFRJ
Cel: (21) 9 8234-9794
Have you tried the "Plot Selection Over Time" filter?
Post by Armin Wehrfritz
It's in "Filter->Data Analysis". You can select cell or point data.
-Armin
Post by Pedro Ceccon Thurler
Hey guys!
I'm in trouble trying to make some plots in paraview.
For my analysis, it's important to plot data from a specific point over
time.
I'm trying some filters, but I'm not succeeding. Do you have some tips
or advices? Thank you for your attention.
Pedro Ceccon Thurler
Bolsista CNPq - Laboratório de Simulação de Sistemas de Construção
Naval
Departamento de Engenharia Naval e Oceânica - UFRJ
Cel: (21) 9 8234-9794
_______________________________________________
Powered by www.kitware.com
Visit other Kitware open-source projects at http://www.kitware.com/
opensource/opensource.html
http://paraview.org/Wiki/ParaView
Search the list archives at: http://markmail.org/search/?q=ParaView
http://public.kitware.com/mailman/listinfo/paraview
_______________________________________________
Powered by www.kitware.com
Visit other Kitware open-source projects at http://www.kitware.com/
opensource/opensource.html
http://paraview.org/Wiki/ParaView
Search the list archives at: http://markmail.org/search/?q=ParaView
http://public.kitware.com/mailman/listinfo/paraview
_______________________________________________
Powered by www.kitware.com
Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
http://paraview.org/Wiki/ParaView
Search the list archives at: http://markmail.org/search/?q=ParaView
http://public.kitware.com/mailman/listinfo/paraview
_______________________________________________
Powered by www.kitware.com
Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
http://paraview.org/Wiki/ParaView
Search the list archives at: http://markmail.org/search/?q=ParaView
http://public.kitware.com/mailman/listinfo/paraview
Pedro Ceccon Thurler
2015-01-27 10:26:05 UTC
Permalink
Thank you one more time, guys!
Your help has been really usefull to me.

Pedro Ceccon Thurler

Bolsista CNPq - Laboratório de Simulação de Sistemas de Construção Naval
Departamento de Engenharia Naval e Oceânica - UFRJ
Cel: (21) 9 8234-9794
Post by David E DeMarle
Click on the filter in the pipeline and then go to save data.
Choose csv format, which excel will readily read.
David E DeMarle
Kitware, Inc.
R&D Engineer
21 Corporate Drive
Clifton Park, NY 12065-8662
Phone: 518-881-4909
On Fri, Jan 23, 2015 at 11:03 AM, Pedro Ceccon Thurler <
Post by Pedro Ceccon Thurler
Thank you all, guys!
I solved my problem. I'm able to plot the data now.
But, only one more question: is it possible to export this plot data to a
Excel file?
If it's possible, how do I do that?
Pedro Ceccon Thurler
Bolsista CNPq - Laboratório de Simulação de Sistemas de Construção Naval
Departamento de Engenharia Naval e Oceânica - UFRJ
Cel: (21) 9 8234-9794
Post by Andy Bauer
For moving grids or grids that don't have a grid point exactly at the
coordinate you want to plot over time, you can use the probe filter to get
the desired location and then use the plot selection over time for that.
On Wed, Jan 21, 2015 at 11:57 AM, Pedro Ceccon Thurler <
Post by Pedro Ceccon Thurler
The guys from the lab did an experiment and measured the residual
stress on some points with specific coordinates.
I have to measure the stress on the same points along time in my
simulation so i can compare the results with the real values and validate
my model.
But I don't know how to do that.
Pedro Ceccon Thurler
Bolsista CNPq - Laboratório de Simulação de Sistemas de Construção Naval
Departamento de Engenharia Naval e Oceânica - UFRJ
Cel: (21) 9 8234-9794
Have you tried the "Plot Selection Over Time" filter?
Post by Armin Wehrfritz
It's in "Filter->Data Analysis". You can select cell or point data.
-Armin
Post by Pedro Ceccon Thurler
Hey guys!
I'm in trouble trying to make some plots in paraview.
For my analysis, it's important to plot data from a specific point over
time.
I'm trying some filters, but I'm not succeeding. Do you have some tips
or advices? Thank you for your attention.
Pedro Ceccon Thurler
Bolsista CNPq - Laboratório de Simulação de Sistemas de Construção
Naval
Departamento de Engenharia Naval e Oceânica - UFRJ
Cel: (21) 9 8234-9794
_______________________________________________
Powered by www.kitware.com
Visit other Kitware open-source projects at http://www.kitware.com/
opensource/opensource.html
http://paraview.org/Wiki/ParaView
Search the list archives at: http://markmail.org/search/?q=ParaView
http://public.kitware.com/mailman/listinfo/paraview
_______________________________________________
Powered by www.kitware.com
Visit other Kitware open-source projects at http://www.kitware.com/
opensource/opensource.html
http://paraview.org/Wiki/ParaView
Search the list archives at: http://markmail.org/search/?q=ParaView
http://public.kitware.com/mailman/listinfo/paraview
_______________________________________________
Powered by www.kitware.com
Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
http://paraview.org/Wiki/ParaView
Search the list archives at: http://markmail.org/search/?q=ParaView
http://public.kitware.com/mailman/listinfo/paraview
_______________________________________________
Powered by www.kitware.com
Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
http://paraview.org/Wiki/ParaView
Search the list archives at: http://markmail.org/search/?q=ParaView
http://public.kitware.com/mailman/listinfo/paraview
Continue reading on narkive:
Loading...